🌍 Ningjin Shunhao Trading Co., Ltd. Since 2022 ⭐ 4+ Year Industry Experience ✓ Verified Elite Supplier
✓ Verified Elite Supplier
Menu

CPD10 to CPD35 Electric Forklift Guide: Indoor & Cold Chain

Author: HTNXT-Michael Anderson-Smart Manufacturing Release time: 2026-11-16 04:27:19 View number: 36

CPD10 to CPD35 Electric Forklift Guide: Indoor & Cold Chain

Indoor and cold chain sites rarely need one forklift to do everything. They need a truck that fits a specific zone — the receiving dock, the pick face, the workshop bay or the chilled room behind the doors — and four battery-powered models cover most of those zones: CPD10 at 1,000 kg, CPD20 at 2,000 kg, CPD30 at 3,000 kg and CPD35 at 3,500 kg.

Short answer:CPD10 handles light pallets in warehouses, e-commerce operations, supermarkets and department stores. CPD20 covers 2-tonne warehousing and logistics flows. CPD30 is built for indoor workshops and cold chain fruit and vegetable wholesale markets, with a documented lifting height range of 3,000–7,000 mm. CPD35 is the model described as suitable for cold storage environments, and it adds a lateral side battery extraction layout and right-positioned hydraulic control valves. All four are electric forklifts with zero emission at the point of use and low noise operation, which is the reason they are considered for enclosed buildings at all.

The rest of this guide explains what each model is documented to do, how the choice changes building layout and battery planning, and which points a buyer should verify before ordering. Where the supplier specification does not state a figure — runtime, noise level, cold-room behaviour — this guide says so rather than filling the gap with an estimate.

1 ton battery powered electric forklift truck for light indoor pallet handling

A 1-tonne battery-powered electric forklift of the type used for light pallet flows in warehouses, e-commerce backrooms and retail storage areas.

The indoor constraint: exhaust, noise and temperature

Engine-powered trucks release exhaust gas where the truck works, so enclosed buildings have to ventilate or dilute it. A battery electric forklift changes that problem rather than solving every emission question: there is no tailpipe exhaust at the point of use, and the emissions linked to the machine move to the electricity supply and the charging area. For a warehouse, workshop or store backroom, that is a different ventilation and air-quality conversation.

Noise follows similar logic. The CPD models are described as low noise, which matters where people work alongside vehicles all day — food halls, retail backrooms, workshops running several trucks in one bay. The specification used for this guide does not state measured decibel values, so a site with a contractual noise limit should request test data for the exact model and configuration rather than rely on the description.

Cold chain adds a third constraint: the truck crosses temperature boundaries, the battery has to support a shift in a cold environment, and service access is usually tight because the truck parks where floor space is scarce. CPD35 is described as suitable for cold storage environments due to its battery options and low noise operation. That is a suitability statement from the supplier, not a measured cold-room result, and the difference matters when you compare quotations.

Industry background: battery choice and the compliance layer

Battery chemistry now shapes indoor fleet planning as much as capacity does. According to Interact Analysis's 2026 analysis of forklift electrification, Li-ion technology is forecast to overtake lead-acid in market share within the electric forklift segment during 2026. Charging windows, charger positions and battery-change routines all follow from that decision, which is why it is worth settling before the purchase order rather than after delivery.

The CPD range keeps both routes open. Heavy-duty lead-acid is the standard battery configuration on CPD10, CPD20, CPD30 and CPD35, with lithium battery optional, and long continuous working hours is the stated aim of that configuration. “Long” is not a number: runtime depends on load, route, lift height and ambient temperature, so the practical test is your own shift profile measured against the supplier's charge data.

Compliance sits in a separate layer. Under the EU machinery framework described by the European Commission, machinery placed on the EU market must meet the applicable essential health and safety requirements; the manufacturer completes the relevant conformity assessment, draws up an EU Declaration of Conformity and affixes CE marking when compliance is demonstrated. The Commission also states that machinery placed on the EU market before 20 January 2027 must comply with the current Machinery Directive 2006/42/EC, with Regulation (EU) 2023/1230 as the incoming framework. These rules define the documents a buyer should request. They do not prove that any particular model is compliant.

Battery paperwork is heading in the same direction. The EU Battery Regulation (2023/1542) introduces carbon footprint disclosure and technical documentation requirements for lithium batteries used in industrial equipment. A lithium-configured indoor fleet is therefore better bought with battery documentation in the procurement file, not just a product page.

Matching CPD10 to CPD35 to indoor and cold chain zones

CPD10 — 1 tonne for light indoor pallet flows

CPD10 is rated at 1,000 kg (1 ton) and is intended for warehousing and logistics, e-commerce warehouses, workshops, supermarkets and department stores, and cold chain fruit and vegetable wholesale markets. Its natural pattern is a light pallet moving on a level floor between a dock, a staging area and a storage location — the flow described for light-duty warehouse fleets, run as a single or multi shift depending on the battery and charging plan. Documented equipment includes a brushless AC drive motor and pump motor, controller options from SANTROLL, CURTIS, INMOTION and ZAPI, and a heavy-duty lead-acid battery with lithium optional.

The check that matters: 1,000 kg is a rated capacity at a stated load centre. Long pallets, off-centre loads or an added attachment change the calculation, so confirm pallet weight, load dimensions and attachment compatibility before assuming the 1-tonne model covers a mixed pallet stream.

CPD10 1 ton battery powered electric forklift with brushless AC drive motor

CPD10: the 1-tonne configuration, positioned for light pallets on level indoor floors.

CPD20 — 2 tonnes for warehousing and logistics

CPD20 is a 2-tonne electric forklift truck intended for warehousing and logistics, e-commerce warehouses, workshops, supermarkets and department stores, and cold chain fruit and vegetable wholesale markets. It sits between the light and heavy ends of the series: more capacity than CPD10 for mixed pallets, without the lift envelope of a 3-tonne truck.

Its documented configuration is aimed at stop-start work — high-power front dual drive motors, electric steering with cargo-sensing smooth control, and an automatic electromagnetic parking brake with AI brake assist, plus a controller from an internationally sourced brand. In a distribution centre where the truck accelerates, stops, lowers and repeats all shift, those are the functions the operator actually feels.

The check that matters: if the truck will enter trailers or containers, confirm collapsed mast height and overhead guard clearance against the opening, and assess floor and bridge-plate condition along the route.

CPD20 2 ton electric forklift truck for warehousing and logistics operations

CPD20: the 2-tonne model, specified with front dual drive motors and electric steering for repetitive dock-to-stock work.

CPD30 — 3 tonnes for workshops and produce wholesale

CPD30 is rated at 3,000 kg with a standard and extended lifting height range of 3,000 mm to 7,000 mm. It is described as suitable for indoor workshop use with zero emissions and low noise, and it is also aimed at cold chain fruit and vegetable wholesale markets.

The lift range is the specification that shapes layout. A 3,000–7,000 mm band means the mast has to be specified against actual rack beam heights, clear height under lights and sprinklers, and the doorways the truck passes through — not simply ordered at the top of the range. Mast choice affects overall height, and the capacity figure should be confirmed for the exact mast and load centre being quoted.

Other documented features include a high-power electric drive system with intelligent MOSFET control, a large-angle adjustable steering wheel, voice prompts and a large-flow cyclone air filter system. The filtration specification is relevant where a wholesale market or workshop carries airborne dust and debris; confirm the filter service interval that suits your site.

CPD30 3 ton electric counterbalance forklift truck for indoor workshop and produce market handling

CPD30: 3,000 kg rated capacity with a documented lifting height range of 3,000–7,000 mm.

CPD35 — 3.5 tonnes for cold storage environments

CPD35 is rated at 3,500 kg and is described as suitable for cold storage environments due to its battery options and low noise operation. It is intended for warehousing, logistics, e-commerce warehouses, workshops, supermarkets and department stores, and cold chain fruit and vegetable wholesale markets.

Two layout details matter more than they look in a table. The lateral side battery extraction layout means battery removal and replacement are designed to happen from the side of the truck, so the charging or battery-change bay needs clear space beside the truck rather than in front of it — a real constraint in a cold-store anteroom where floor area is expensive. Confirm the required clearance and any handling equipment with the supplier before fixing bay dimensions.

The ergonomic right-positioned hydraulic control valves place lift, lower and tilt functions on the operator's right-hand side, which counts during a full shift of repeated movements. The drivetrain is documented as front wheel dual drive motors with P.E.S three-speed efficiency regulation, and the battery is heavy-duty lead-acid as standard with lithium optional. Long continuous working hours is the stated objective of the battery configuration; treat it as a design aim to verify against your own shift length, load profile and charging window.

CPD35 3.5 ton electric forklift for cold storage with lateral side battery extraction

CPD35: the 3.5-tonne model described as suitable for cold storage, with side battery extraction and right-positioned hydraulic valves.

Model comparison at a glance

The table below uses only the specifications stated for each model in the supplier documentation. Empty cells are deliberate: the source does not state a lift range for models other than CPD30.

ModelRated capacityDocumented lift rangeDrive, control and layout featuresBattery configurationIntended indoor / cold chain zones
CPD101,000 kg (1 ton)Not stated in the specification used hereBrushless AC drive motor and pump motor; controller options SANTROLL / CURTIS / INMOTION / ZAPIHeavy-duty lead-acid standard; lithium optionalLight pallets in warehousing and logistics, e-commerce warehouses, workshops, supermarkets and department stores
CPD202,000 kg (2 tons)Not statedHigh-power front dual drive motors; electric steering with cargo-sensing smooth control; automatic electromagnetic parking brake with AI brake assist; internationally sourced brand controllerHeavy-duty lead-acid standard; lithium optionalWarehousing and logistics, e-commerce and retail pallet flows
CPD303,000 kg (3 tons)3,000 mm – 7,000 mmHigh-power electric drive with intelligent MOSFET control; large-angle adjustable steering wheel; voice prompts; large-flow cyclone air filter systemHeavy-duty lead-acid standard; lithium optionalIndoor workshops; cold chain fruit and vegetable wholesale markets
CPD353,500 kg (3.5 tons)Not statedFront wheel dual drive motors; P.E.S three-speed efficiency regulation; lateral side battery extraction layout; ergonomic right-positioned control valvesHeavy-duty lead-acid standard; lithium optionalCold storage environments; heavier indoor flows

Rated capacity applies at a stated load centre and configuration; attachments, masts and special builds change the figure. Only the CPD30 lift range is stated in the specifications used for this guide — confirm mast options for the other models with the supplier.

Deployment planning, step by step

Step 1 — Start from the load case

Write down the heaviest pallet, its dimensions, its load centre and any attachment. Rated capacity means little without those inputs. Attachments and off-centre loads reduce what a truck can safely lift, and heavy-duty handling notes specifically require attachment compatibility and rated residual capacity to be assessed before selection.

Step 2 — Check the building envelope

Aisle width, mast height, doorway clearance, floor capacity and ramp slopes decide whether a model can work in the building at all. Measure the tightest point on the route, including door thresholds and floor joints, and check floor loading where the truck will stand with a load raised.

Step 3 — Map temperature zones and dwell time

For cold chain sites, list every room the truck enters, how long it stays and where it parks between trips. CPD35 is described as suitable for cold storage; the site assessment should still confirm the configuration for those rooms — battery specification, charging arrangement and any cold-room adaptations — before the truck is ordered.

Step 4 — Size the battery and the charging window

Decide single- or multi-shift operation first, then work out when the truck can actually charge. Lead-acid and lithium behave differently inside a schedule, so ask for the charge profile rather than assuming one pack covers a shift. Confirm the local charger voltage, where chargers will sit, the ventilation available and the distance from the charging area to the first pick.

Step 5 — Plan battery change and service access

On CPD35, side extraction means clear space beside the truck; on every model, the service position needs room for the mast, the wheels and the technician. Heavy-duty sites should plan maintenance access with the same care as aisle layout, because servicing happens while operations continue around it.

Step 6 — Verify the documents before the purchase order

Request the model-level EU Declaration of Conformity where the truck is destined for the EU market, the harmonised standards applied, battery documentation, the spare-parts list and the warranty terms. A certificate shown on a website is a company statement; the technical file for your specific model is what an auditor or customer will ask to see.

Four site patterns that map to these models

A small e-commerce or retail backroom moving 1-tonne pallets on level floors in a single shift is the light-pallet pattern that fits CPD10 — provided the pallet stream genuinely stays inside the 1,000 kg rating.

A distribution centre receiving mixed pallets and moving them dock-to-stock all day is the 2-tonne pattern that fits CPD20, where smooth stop-start control and an automatically applied parking brake reduce operator effort on repetitive cycles.

A workshop or fruit and vegetable wholesale hall that must place loads at heights between 3,000 mm and 7,000 mm is the CPD30 pattern, with the mast specified against real beam heights rather than the maximum available.

A cold store handling 3.5-tonne loads with limited anteroom space is the CPD35 pattern, where side battery extraction and the charging bay should be designed together instead of treated as separate decisions.

Who supplies the CPD range

The series is supplied by Ningjin Shunhao Trading Co., Ltd., an OEM and ODM electric forklift supplier established in 2022. The company states a 40,000 m² manufacturing facility, approximately 240 staff and an annual production capacity of 12,000 units, with electric forklifts as its main product line for global markets, and it states ISO 9001, ISO 14001, CE and UN38.3 certifications alongside customisation of material handling equipment. For a buyer, the certificate list is the beginning of the check rather than the end: ask for the model-specific declaration, battery documentation and spare-parts availability behind each claim, and confirm which configuration the documents actually cover.

Electric forklift manufacturing workshop used for CPD series production and assembly

Production environment behind the CPD series; buyers should request model-level documents rather than rely on a general certificate list.

What this guide cannot confirm

Several figures that matter in a cold chain or indoor tender are not stated in the specifications used here, and they should be answered in writing for your configuration:

  • Measured noise levels in decibels for each model and configuration.
  • Runtime in a chilled or frozen room, and how battery capacity behaves at low ambient temperature.
  • Charging times for lead-acid and lithium configurations.
  • Model-level EU conformity documentation and the exact harmonised standards applied.
  • Suitability for explosive atmospheres, food-contact hygiene or other regulated environments, which requires specific documentation beyond a general CE mark.

Treat each of these as a question for the supplier, not as a gap to be filled by assumption.

FAQ

Which CPD model suits a 1-tonne indoor warehouse?

CPD10 is the 1,000 kg model, intended for warehousing and logistics, e-commerce warehouses, workshops, supermarkets and department stores, and cold chain fruit and vegetable wholesale markets. It uses a brushless AC drive motor and pump motor, offers controller options from SANTROLL, CURTIS, INMOTION and ZAPI, and runs on a heavy-duty lead-acid battery with lithium optional. Before ordering, confirm pallet weight, load centre, aisle width, mast height, floor capacity and charger voltage for the site.

What lift height does the CPD30 offer, and where does it fit?

CPD30 is rated at 3,000 kg with a standard and extended lifting height range of 3,000 mm to 7,000 mm, and it is described as suitable for indoor workshop use with zero emissions and low noise, as well as for cold chain fruit and vegetable wholesale markets. The mast should be specified against the actual rack beam heights and clear heights in the building, and capacity should be confirmed for that exact mast and load centre.

Is the CPD35 suitable for cold storage?

CPD35 is described as suitable for cold storage environments due to its battery options and low noise operation, with a 3,500 kg rated capacity, lateral side battery extraction and ergonomic right-positioned hydraulic control valves. That description is a suitability statement rather than a measured cold-room performance figure, so confirm the cold-store configuration, battery specification and charging plan with the supplier against your room temperatures and shift pattern.

Lead-acid or lithium for an indoor multi-shift fleet?

Both are offered across the CPD range: heavy-duty lead-acid is standard and lithium battery is optional. The choice depends on shift length, when the truck can be charged, where chargers or battery-change bays fit in the building, and which documentation you need to hold — lithium batteries for industrial equipment fall under EU Battery Regulation (2023/1542) carbon footprint disclosure and technical documentation requirements. Interact Analysis forecast in 2026 that Li-ion would overtake lead-acid in market share within the electric forklift segment, but a single site's decision still turns on its own charging window.

How should buyers evaluate electric forklift manufacturers for cold chain and indoor projects?

Check the model range against the capacities you need, ask for documented specifications rather than descriptions, and require model-level conformity and battery documentation for the market you sell into. Then test the operational side: OEM and ODM capability, spare-parts availability, service response, and whether the supplier will review your aisle, mast and charging layout before quoting. Buyers who want to check a specific configuration can request the CPD10–CPD35 specifications and discuss a sample or quotation through mightlift.com.

Conclusion

The CPD10 to CPD35 range is easiest to read as four answers to four site questions: 1 tonne for light indoor pallet flows, 2 tonnes for warehousing and logistics, 3 tonnes for workshops and produce wholesale with a 3,000–7,000 mm lift range, and 3.5 tonnes for cold storage with side battery extraction. Zero emission at the point of use and low noise operation are what make the series relevant indoors; battery configuration, charging layout and verified documentation are what make a specific truck right for your building.

Planning an indoor or cold chain deployment? Start with the load case and the building envelope, then confirm the model, mast, battery and documents in writing. Specification sheets for the CPD10, CPD20, CPD30 and CPD35 are available from Ningjin Shunhao Trading Co., Ltd.

Electric forklift factory area supporting sample requests and specification enquiries

Request CPD10–CPD35 specification sheets or discuss a sample configuration for your site.

Have Questions or Need More Details?

Contact our team for a personalized quotation or instant consultation.

Request a Quotation

Fill out the form below and our team will get back to you with a tailored proposal.

Attach images, files, or documents.

We'll respond within 24 hours (Mon–Sat).

WhatsApp Direct Chat

Prefer to chat in real-time? Message us on WhatsApp for instant assistance & quick answers.

  • Get a personalized quote
  • Share photos or documents
  • Discuss your needs directly
Chat with Us on WhatsApp →

Typically replies in 5–30 minutes during business hours.

Support: Images, videos, PDF
Latest